Project Experience
The Ministry of Energy and Mineral Resources and Lemtek UI Discuss the Finalization of the FEED–DEDC for the Household Gas Network
Project Owner :
The Institute for Technology at the University of Indonesia (Lemtek UI), in coordination with the Ministry of Energy and Mineral Resources (ESDM), convened the Finalization of the Contract for the Adjustment Study of the FEED–DEDC for the Household Gas Network on Monday–Tuesday, 29–30 December 2025, at Meeting Room E, Office of Public Works, Housing, and Energy and Mineral Resources, Yogyakarta. This activity constituted the final stage of discussions for the preparation of the Front End Engineering Design–Detail Engineering Design & Construction (FEED–DEDC) documents for the development of a national-scale household gas distribution network.
The discussion was attended by representatives of the Directorate of Infrastructure Planning and Development, Directorate General of Oil and Gas, Ministry of Energy and Mineral Resources, along with the project team from Lemtek UI, Diponegoro University, and the Oil and Gas Technology Development and Testing Center (LEMIGAS) as the implementing technical institution.
The discussion was attended by representatives of the Directorate of Infrastructure Planning and Development, Directorate General of Oil and Gas, Ministry of Energy and Mineral Resources, along with the project team from Lemtek UI, Diponegoro University, and the Oil and Gas Technology Development and Testing Center (LEMIGAS) as the implementing technical institution.
Lemtek UI Ditunjuk Untuk Melaksanakan Pekerjaan Analisa Fasilitas Produksi milik PHE ONWJ
Project Owner :
Di akhir Nopember 2025, Lemtek UI telah ditunjuk pleh PT Pertamina Hulu Energi ONWJ untuk melakukan analisa fasilitas produksi milik PHE ONWJ. Analisa tersebut dilakukan untuk mengevaluasi kelayakan perpanjangan umur operasional instalasi fasilitas produksi sekaligus merumuskan strategi pemeliharaan asset manajemen yang berdasarkan pada penilaian risiko dari fasilitas produksi eksisting tersebut, sehingga dapat meminimalisir kemungkinan terjadinya insiden keselamatan maupun kegagalan operasional pada fasilitas produksi di area PHE ONWJ. Lingkup pekerjaannya meliputi: RLA (Residual Life Assessment) Instalasi Fasilitas Produksi, Analisa Risiko (AR) Instalasi Fasilitas Produksi, Analisa Integriti Struktur Flare dan Studi Koneksivitas Elektrikal Anodepod pada Struktur Flare.
Untuk pekerjaan RLA (Residual Life Assessment) dan Analisa Risiko (AR) Instalasi Fasilitas Produksi dilakukan pada sekitar lebih dari 40 offshore platform unit yang berada di di Area BRAVO, ECHO, FOXTROT, MIKE-MIKE, NGL, ZULU. Lemtek UI melakukan pekerjaan ini sesuai dengan peraturan Pemerintah, codes, spesifikasi standar dan prosedur yang berlaku seperti: Peraturan Menteri ESDM No. 32 Tahun 2021 Tentang Inspeksi Teknis dan Pemeriksaan Keselamatan Instalasi dan Peralatan pada Kegiatan Usaha Minyak dan Gas Bumi, Keputusan Direktur Teknik dan Lingkungan Minyak dan Gas Bumi No. 183.K/HK.02/DMT/2024 Tentang Mekanisme Perpanjangan Sisa Umur Layan (RLA) Instalasi dan Peralatan pada Kegiatan Usaha Minyak Dan Gas Bumi, Keputusan Direktur Teknik dan Lingkungan Minyak dan Gas Bumi No. 197.K/HK.02/DMT/2024 Tentang Mekanisme Analisis Risiko pada Kegiatan Usaha Minyak dan Gas Bumi, API 581 – Risk Based Inspection: Base Resource Document, API RP 580 – Risk Based Inspection, API RP 2A-WSD – Recommended Practice for Planning, Designing and Construction Fixed Offshore Platform – Working Stress Design, 21st Edition, API RP 2SIM – Structural Integrity Management of Fixed Offshore Structures. Di dalam pelaksanaan pekerjaan ini Lemtek UI melibatkan tim dari PT. Dinamika Teknik Persada yang memiliki banyak pengalaman untuk pekerjaan sejenis.
Pada hari Selasa 13 Januari 2026 di ruang rapat Lemtek UI Lantai 2, dilakukan pertemuan antara tim Lemtek UI dengan PT Dinamika Teknik Persada untuk membahas review proses akhir kegiatan tersebut diatas. Tim dari Lemtek UI terdiri dari Prof Dr Asep Handaya (Direktur), Dr Wisnu Isvara MT (General Manager), Varianka Yenn ST (IT & Energy Manager), Retyaning P Utami MT (Marketing Manager), Ir Endang Kusmana (Senior Advisor). Sedangkan dari PT Dinamika Teknik Persada terdiri dari Iwan S (Direktur), Mohammad Abror (Sales & Marketing Manager), Taufan (Project Manager). Kedua belah pihak sepakat untuk tetap mengawal pekerjaan ini hingga tuntas serta membuka peluang kerjasama lebih luas di proyek-proyek lainnya di masa mendatang.
Untuk pekerjaan RLA (Residual Life Assessment) dan Analisa Risiko (AR) Instalasi Fasilitas Produksi dilakukan pada sekitar lebih dari 40 offshore platform unit yang berada di di Area BRAVO, ECHO, FOXTROT, MIKE-MIKE, NGL, ZULU. Lemtek UI melakukan pekerjaan ini sesuai dengan peraturan Pemerintah, codes, spesifikasi standar dan prosedur yang berlaku seperti: Peraturan Menteri ESDM No. 32 Tahun 2021 Tentang Inspeksi Teknis dan Pemeriksaan Keselamatan Instalasi dan Peralatan pada Kegiatan Usaha Minyak dan Gas Bumi, Keputusan Direktur Teknik dan Lingkungan Minyak dan Gas Bumi No. 183.K/HK.02/DMT/2024 Tentang Mekanisme Perpanjangan Sisa Umur Layan (RLA) Instalasi dan Peralatan pada Kegiatan Usaha Minyak Dan Gas Bumi, Keputusan Direktur Teknik dan Lingkungan Minyak dan Gas Bumi No. 197.K/HK.02/DMT/2024 Tentang Mekanisme Analisis Risiko pada Kegiatan Usaha Minyak dan Gas Bumi, API 581 – Risk Based Inspection: Base Resource Document, API RP 580 – Risk Based Inspection, API RP 2A-WSD – Recommended Practice for Planning, Designing and Construction Fixed Offshore Platform – Working Stress Design, 21st Edition, API RP 2SIM – Structural Integrity Management of Fixed Offshore Structures. Di dalam pelaksanaan pekerjaan ini Lemtek UI melibatkan tim dari PT. Dinamika Teknik Persada yang memiliki banyak pengalaman untuk pekerjaan sejenis.
Pada hari Selasa 13 Januari 2026 di ruang rapat Lemtek UI Lantai 2, dilakukan pertemuan antara tim Lemtek UI dengan PT Dinamika Teknik Persada untuk membahas review proses akhir kegiatan tersebut diatas. Tim dari Lemtek UI terdiri dari Prof Dr Asep Handaya (Direktur), Dr Wisnu Isvara MT (General Manager), Varianka Yenn ST (IT & Energy Manager), Retyaning P Utami MT (Marketing Manager), Ir Endang Kusmana (Senior Advisor). Sedangkan dari PT Dinamika Teknik Persada terdiri dari Iwan S (Direktur), Mohammad Abror (Sales & Marketing Manager), Taufan (Project Manager). Kedua belah pihak sepakat untuk tetap mengawal pekerjaan ini hingga tuntas serta membuka peluang kerjasama lebih luas di proyek-proyek lainnya di masa mendatang.
Berita duka
Innaa lillahi wa innaa ilaihi rojiuun.
Allahummaghfirlaha warhamha wa’afiha wa’fu anha.
Telah berpulang ke rahmatullah rekan dan sahabat tercinta kami, Armala Sary, SE selaku accounting & finance manager. Almarhumah meninggal dunia pada hari Sabtu, 10 Januari 2026.
Mohon dibukakan pintu maaf yang sebesar-besarnya. Semoga almarhumah husnul khotimah diterima segala amal ibadahnya, diampuni segala khilafnya dan ditempatkan yang terbaik di sisi Allah SWT. Amin ya rabbal alamin
Project Owner :
Innaa lillahi wa innaa ilaihi rojiuun.
Allahummaghfirlaha warhamha wa’afiha wa’fu anha.
Telah berpulang ke rahmatullah rekan dan sahabat tercinta kami, Armala Sary, SE selaku accounting & finance manager. Almarhumah meninggal dunia pada hari Sabtu, 10 Januari 2026.
Mohon dibukakan pintu maaf yang sebesar-besarnya. Semoga almarhumah husnul khotimah diterima segala amal ibadahnya, diampuni segala khilafnya dan ditempatkan yang terbaik di sisi Allah SWT. Amin ya rabbal alamin
From Conventional Layouts to Efficient Workspaces: Technical Planning for the Renovation of the Ditjen EBTKE Building
Project Owner :
The workspaces covering approximately ±1,999 m² on the 7th, 8th, and 8th Mezzanine floors of the Directorate General of New, Renewable Energy, and Energy Conservation (Ditjen EBTKE) building are still predominantly characterized by permanent partition-based layouts, high reliance on artificial lighting, and uneven distribution of cooling systems. These conditions limit the effective use of natural daylight, reduce indoor air circulation quality, and directly contribute to increased electrical energy consumption as well as suboptimal thermal comfort for occupants.
In response to organizational restructuring and the growing demand for coordination-oriented work patterns, Ditjen EBTKE has initiated a technical planning process for interior renovation based on an energy-efficient open space concept. This planning effort is aligned with national energy conservation policies as stipulated in Government Regulation No. 70 of 2009, Presidential Instruction No. 13 of 2011, and the Central Government Green Building Roadmap, and is carried out in collaboration with the University of Indonesia through the Institute for Technology at the University of Indonesia (Lemtek UI) as the technical planning executor.
The scope of work includes existing condition surveys, analysis of spatial and system requirements, and the preparation of comprehensive technical planning documents, covering open space layout concepts, architectural and interior working drawings, utility systems, lighting, and HVAC, along with detailed technical specifications and cost estimates. These documents are structured to serve as a measurable and reliable technical reference for subsequent physical renovation works, with a clear focus on energy efficiency and controlled functional performance of the workspace.
In response to organizational restructuring and the growing demand for coordination-oriented work patterns, Ditjen EBTKE has initiated a technical planning process for interior renovation based on an energy-efficient open space concept. This planning effort is aligned with national energy conservation policies as stipulated in Government Regulation No. 70 of 2009, Presidential Instruction No. 13 of 2011, and the Central Government Green Building Roadmap, and is carried out in collaboration with the University of Indonesia through the Institute for Technology at the University of Indonesia (Lemtek UI) as the technical planning executor.
The scope of work includes existing condition surveys, analysis of spatial and system requirements, and the preparation of comprehensive technical planning documents, covering open space layout concepts, architectural and interior working drawings, utility systems, lighting, and HVAC, along with detailed technical specifications and cost estimates. These documents are structured to serve as a measurable and reliable technical reference for subsequent physical renovation works, with a clear focus on energy efficiency and controlled functional performance of the workspace.
Q3 26
Project Owner :
Q3 25
Project Owner :
Q3 24
Project Owner :
Q3 23
Project Owner :
Q3 22
Project Owner :
Q3 21
Project Owner :
Q3 20
Project Owner :
Q3 19
Project Owner :